Model NC-306 hydraulic cutting adopts completely the full oil hydraulic control system. The specially design hydraulic circuits are easy to operate and maintain. Increasing invariably the productivity for its users, it is a useful machine designed for various workpieces in need outings such as leather, plastic, cloth, leather bags, handicrafts, toys, hats and caps, vacuum formed articles paper, garment, sponge, non-woven, floor covering, carpet, baby carriages, balls, envelopes, gaskets, rain wear, umbrella, rubber products, cork products, ply-wood door etc.
Features:
- It is 2-section balanced cutting mode which the first section is going down of up-cutting palate, the second section is super high pressure cutting there are beautiful cut edge of cut products by this mode and the mode can increase life of NC-306 and save electric power rate.
- 4-column balanced cutting, each pressure point is same pressure.
- It may be operated manually or by pedal control.
- This M/C furnished with electric-magnetic digital display, it may accurately show the number of cutting time to promote.
- Low in noise and smooth in operations.
- This M/C equipped with emergency stop mechanism.
- Can following customers' request to produce.
- We can accept sample Purchase.
- Product Ownership:
- OEM/ODM Product
- Branded Product
- Buyer's Label Offered
Certificate:
- CE
Others:
| Pressure | Cutting Area | Motor | Stroke | Up Speed | Down Speed |
|---|---|---|---|---|---|
| 100 Ton | 1,600 x 1,250 m/m | 15 HP | 50 - 280 m/m | 90 mm/sec | 100 mm/sec |
| 150 Ton | 1,600 x 1,600 m/m | 15 HP | 50 - 280 m/m | 90 mm/sec | 100 mm/sec |
| 200 Ton | 1,820 x 1,250 m/m | 17 HP | 50 - 280 m/m | 90 mm/sec | 100 mm/sec |
| 250 Ton | 2,200 x 1,600 m/m | 20 HP | 50 - 280 m/m | 90 mm/sec | 100 mm/sec |
| 300 Ton | 2,500 x 1,600 m/m | 20 HP | 50 - 280 m/m | 90 mm/sec | 100 mm/sec |
Ordering information:
- Minimum Order: 1 set
- FOB: Taichung, any port of Taiwan