1. Enhance the reflection of road marking lines during the raining night since the tiny glass beads in the thermoplastic are non-reflective in the rainy water. 2. Guiding traffic in the freeways or winding curves at night in addition to the road marking lines, and providing safer visual environment. The tiny glass beads in the thermoplastic fall off easily; thus the reflection of road marking lines declines extensively. The bumping action will alert motorists when they change lanes. The simple way of distinguishing between Tiger Eye and general hand-made glass road marking reflector is as follows: Use stainless steel ball of 1.04 kg to impact the center of the reflector by free falling from height of 150 cm. The surface of Tiger Eye shows no marks after impact and other hand-made glass road marking reflectors produce different level of broken glass pieces
Specifications:
- Provide well safety warning facilities.
- Use the drilling machine to make a hole with diameter of 100mm and depth of 25mm (mark on the drilling machine or add a ring slot on the drilling bit to ensure certain depth of the hole drilled).
- Use the bush tool to remove asphalt from middle of the hole (in case of cement road surface, use jack hammer to crush the cement)
- Blow away the sandy soil and water in the hole with high pressure air (or absorb water with sponge).
- Use mold with fixed height to test if the depth of hole is suitable or not (otherwise modification must be made).
- Place asphalt glue or epoxy resin into the hole
- (The asphalt glue is fast hardening and fast to work with; it influences traffic less with low cost, which is suitable for highway, large traffic flow or large amount of continuous installation. For loose works with less quantity, epoxy resin is used)
- Place Tiger Eye into the hole and rotate for about 30¢X; finally, lightly knock the top of Tiger Eye with rubber hammer for smoothness and complete fixture.
Features:
- No blind spot in any curve
- High degree of surface hardness and scratch-proof surface; the reflection can last extremely long.
- High strength and long durability.
- The protruding part is 100% reflective.
- Smooth surface and not easy to accumulate dust, which needs no cleaning and maintenance
- Purchase of sample is accepted
Ordering information:
- Minimum Order: 3000pcs set
- TEL: 886-3-5984567
- FAX: 886-3-5977899
- E-mail: seih.ying@msa.hinet.net