Punch
Product ID: 2
| (d) | D | D | H | H | R | a | a | b | b | Min.(R) | Max.(M) | Max. Q(16) | Min. Q(16) | Punch Code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M2 | 4.5 | 0/-0.4 | 1.2 | +-0.1 | 3 | 0.6 | +0.15/0 | 0.6 | +-0.1 | 0.1 | 2.2 | 1.01 | 0.65 | JMT M2.0 |
| (M2.2) | 5 | 0/-0.4 | 1.3 | +-0.1 | 3.2 | 0.6 | +0.15/0 | 0.65 | +-0.1 | 0.1 | 2.3 | 1.11 | 0.75 | JMT M2.2 |
| *(M2.3) | 5.2 | 0/-0.4 | 1.4 | +-0.1 | 3.4 | 0.6 | +0.15/0 | 0.7 | +-0.1 | 0.1 | 2.4 | 1.21 | 0.85 | JMT M2.3 |
| M2.5 | 5.7 | 0/-0.4 | 1.5 | +-0.1 | 3.7 | 0.8 | +0.15/0 | 0.75 | +-0.1 | 0.1 | 2.5 | 1.32 | 0.95 | JMT M2.5 |
| *(M2.6) | 5.9 | 0/-0.4 | 1.6 | +-0.1 | 3.9 | 0.8 | +0.15/0 | 0.8 | +-0.1 | 0.1 | 2.6 | 1.42 | 1.05 | JMT M2.6 |
| M 3 x 0.5 | 6.9 | 0/-0.5 | 1.9 | +-0.15 | 4.6 | 0.8 | +0.15/0 | 0.95 | +-0.15 | 0.1 | 2.9 | 1.72 | 1.34 | JMT M3.0 |
| (M3.5) | 8.1 | 0/-0.5 | 2.2 | +-0.15 | 5.4 | 1 | +0.15/0 | 1.1 | +-0.15 | 0.1 | 3.9 | 1.83 | 1.30 | JMT M3.5 |
| M 4 x 0.7 | 9.4 | 0/-0.5 | 2.5 | +-0.15 | 6.1 | 1 | +0.15/0 | 1.25 | +-0.2 | 0.2 | 4.2 | 2.13 | 1.60 | JMT M4.0 |
| (M4.5) | 10.6 | 0/-0.6 | 2.8 | +-0.15 | 6.9 | 1 | +0.15/0 | 1.4 | +-0.2 | 0.2 | 4.6 | 2.53 | 1.99 | JMT M4.5 |
| M 5 x 0.8 | 11.8 | 0/-0.6 | 3.1 | +-0.15 | 7.7 | 1.2 | +0.2/0 | 1.6 | +-0.25 | 0.2 | 4.9 | 2.83 | 2.29 | JMT M5.0 |
| M6 | 14 | 0/-0.7 | 3.7 | +-0.2 | 9.1 | 1.2 | +0.2/0 | 1.9 | +-0.3 | 0.25 | 6.2 | 2.86 | 2.31 | JMT M6.0 |
| M8 | 17.8 | 0/-0.8 | 4.8 | +-0.2 | 11.7 | 1.6 | +0.2/0 | 2.4 | +-0.4 | 0.4 | 7.7 | 4.36 | 3.78 | JMT M8.0 |
Main Products:
Punch, Fastener, Screw, Hardware