Nylon Pressure Tube

Product ID: CAT67

Send Inquiry
Esdan Nylon-tubing is made from high-quality nylon-, following the German DIN specification No.73378 and 74324. Therefore Esdan Nylon-tubing has an excellent dimensional stability, is light and saves as much as 75% in weight over rubber hoses and steel lines. Esdan Nylon - is used as a standard for years by many large original equipment manufacturers and industrial users in a wide range of applications. All pressure tubes are TL temperature and light stabilized. Esdan Nylon - tubing is highly resistant to corrosion, heat aging and also fully resists gasoline, diesel, fuel, oil, grease, brake fluids and other chemicals. Esdan Nylon - is easy to install, the tubing can be routed inside frame rails, around corners in continuous length, thus reducing the number of couplings.
Part number Outside Dia. Inside Dia. Wall thickness Minimum bend radius Work pressure (25 Celsius)
ESR-2500-02 1/8" 0.078" 0.023" 3/4" 1250 PSI
ESR-2500-03 3/16" 0.110" 0.038" 1/4" 1250 PSI
ESR-2500-04 1/4" 0.147" 0.050" 1-3/4" 1250 PSI
ESR-2500-05 5/16" 0.186" 0.062" 2-1/4" 1250 PSI
ESR-2500-06 3/8" 0.224" 0.074" 3" 1250 PSI
ESR-2500-08 1/2" 0.303" 0.097" 4" 1250 PSI
Specifications
  • Standard range - imperial sizes
    • Rigid nylon 2500 p.s.i. burst minimum
  • Physical properties (nylon II)
    • Density by 20 Celsius: 1.04g/cm^3
    • Moisture content by 20 Celsius and 30-100% moisture: 0.5-1.9%
    • Specific heat: 2J/gk, 44J/gk
    • Linear conductibility: 1.05kJ/m.h.k.
    • Linear expansion coefficient: 15.10.5 I/K
    • Melting point: ca + 186 Celsius
Features
  • Esdan - nylon tubing - the right products for many applications
  • Colors available: black, natural

Main Products

P.V.C pressure hose, rubber alloy hose, nylon tube, nylon brake tubing, garden hose