Vacuum Differential Locking Unit

Product ID: P02

Send Inquiry
The above differential unit has a vacuum diff lock, the replacement diff center unit has been designed to fit range rover, land rover & Toyota Hilux. The lockable carrier has a slip ring which is connected by four rods to an internally splined locking slip ring which can lock one axle gear to the carrier. "The same locking carrier" can be fitted to a standard range rover, land rover or Toyota Hulux differential. Provision must be made to the differential banjo housing to fit the vacuum actuator to work the diff lock. This vacuum actuated designed differential lock can be adapted to most differentials. The vacuum supply from the engine is utilised via a three port switch mounted in the cabin to operate the diff lock.
Specifications
.Toyota CWNP gears are used in this differential-ratio's available are: 3.54, 3.72, 3.9, 4.1, 4.375, 4.56, 4.71, 4.875, 5.2 & 5.7
Features
  • Complete assembled replacement differential unit with vacuum diff lock for:
    • Range rover: $3,000 per unit (includes a pair of larger axles).
    • Land rover: $3,000 per unit (Inc'd apair of salisbury axles/ drive flanges).
    • Hilux: $2,500 per unit (unit fits standard hilux 30 spline axles).
  • The same locking carrier only-to fit standard diff center with banjo housing vacuum actuator:
    • Range rover: $1,750 per unit (larger axles provided).
    • Land rover: $1,750 per unit (larger axles provided).
    • Land rover salisbury differential: 1,450 per unit (fits standard axles).
    • Hilux: $1,250 per unit (fits standard axles).
    • Landcruiser: $1,450 per unit (fits standard axles).
    • Dana 60 & 70 (23, 30 or 35 spline): $1,650 per unit (fits standard axles).

Main Products

4WD heavy duty differentials, 4WD vacuum lockers & diff locks, and various diff components