Automatic Screw Supplier

Product ID: SAS-503

Send Inquiry
An automatic screw supplier that has drastically raised the speed of screw chucking. A unit processing time per screw will be reduced by 1.4 seconds. Four-times improvement in productivity as against with conventional screw tray.
Model type Nominal diameter Screw min. length (single) Screw min. length (with spring washer) Screw min. length (with spring washer & washer) Screw min. length (countersunk) Screw max. length
SAS-514-IIv Dia.1.4 1.4 N/A N/A 1.8 18.0
517-IIv Dia.1.8 1.6 N/A N/A 2.2 18.0
520-IIv Dia.2.0 1.8 3.0 5.0 2.5 18.0
523-IIv Dia.2.3 2.5 4.0 5.0 2.8 18.0
526-IIv Dia.2.6 2.8 4.0 6.0 3.5 18.0
530-IIv Dia.3.0 3.0 4.0 6.0 4.0 18.0
540-IIv Dia.4.0 4.0 6.8 8.0 5.0 18.0
550-IIv Dia.5.0 5.0 8.0 10.0 6.0 18.0
  • Continuous screw dipping speed: 1.5 sec. / pc.
  • Output speed: 0.5 sec. / pc.
  • Power supply: DC14-16V
  • Dimensions: 122mm x 132mm x 153mm (W x H x D)
  • Weight: 1.1kg
  • Supplied accessories: operation manual, AC power adapter (DC 12V)
  • Model type: SAS-514-IIv, 517-IIv, 520-IIv, 523-IIv, 526-IIv, 530-IIv, 540-IIv, 550-IIv
  • Optional models available for screws shorter than the minimum lengths specified for models 514 through 520
  • Acceptable type of thread: machine and tapping
  • Nominal diameter of screw: eight different models available by nominal diameter (see above table)
  • Acceptable screw heads (cross-recessed head), JCIS: type 1, 2 & 3 pan, (countersunk and oval countersunk); JIS: pan, binding, truss mushroom, pleasure, button, WH, (countersunk, and oval countersunk) - with or without washer or spring washer 8 washer
  • Acceptable screw material: iron or materials attractable by magnet
  • Note: special metal fittings are necessary for countersunk or oval counter sunk type screws shown in parentheses, and may be ordered as optional items
  • When you take out a screw, you do not need to pay any special attention to the position of the screw head. All you have to do is simply fit the tip of the bit between the bit guides, slide it down along the guide, then pull them toward you to pick out the screw
  • Compared with a conventional screw tray, you can save 1.4 seconds per screw. Four-times improvement in productivity
  • It's so easy to operate, even a beginner can learn how to handle it almost instantaneously
  • No need to align screws. All you have to do is simply throw screws in a lot into the supply chamber
  • Wide-range of compatibility with screw types, lengths and head shapes
  • You can easily adjust to the screw head shape with an exterior control of the unit
  • Its small size requires small installation space, an operator can handle several units at a time
  • It comes with dipper overload protection and reverse power polarity prevention circuits

Main Products

automatic screw feeder, assembling robot