| Application | 16mm single unit | 16mm dual unit | 24mm size |
|---|---|---|---|
| Total rotation angle | 300degree+/-5degree | 300degree+/-5degree | 300degree+/-5degree |
| Rotation torque | 20~200gf.cm | 20~200gf.cm | 20~200gf.cm |
| Rotation stopper strength | 6kgf.cm | 6kgf.cm | 6kgf.cm |
| Pull push strength | 8kgf.cm | 8kgf.cm | 8kgf.cm |
| Shaft inclination | Within 0.35mm (measured at the tip of the shaft) | Within 0.35mm (measured at the tip of the shaft) | Within 0.35mm (measured at the tip of the shaft) |
| Bushing nut tighting strength | 10kgf.cm | 10kgf.cm | 10kgf.cm |
| Center click angle | 150degree+/-3degree | 150degree+/-3degree | 150degree+/-3degree |
| Total resistance range | 1K ~1Mohm | 1K~1Mohm | 1K~1Mohm |
| Total resistance tolerance | +/-20% | +/-20% | +/-20% |
| Resistance taper | A, B, C, D, E, K, W, RD | A, B, C, D, E, K, W, RD | A, B, C, D, E, K, W, RD |
| Rated power | 0.05W | 0.05W | B taper 0.5W other than B taper 0.25W |
| Max. operating voltage | 50V AC/20V AC | 50V AC | 150V AC |
| Residual resistance | 10ohm Max. | 30ohm Max. | 30ohm Max. |
| Rotation noise | 47MV Max. | 100MV Max. | 47MV Max. |
| Gang error | N/A | -40-0dB+/-3dB | N/A |
| Insulation resistance | 100Mohm Min. at 500V DC | 100Mohm Min. at 250V DC | 100Mohm Min. at 500V DC |
| Withstand voltage | 1 minute at 500V AC | 1 minute at 300V AC | 1 minute at 500V AC |
| Rotation life | 15000Cycles | 15000Cycles | 10000Cycles |
Main Products
transformer, coil, trimmer potentiometer, VR etc.