DESCRIPTION and APPLICATION
The W-8 is a line array system which is made of two 12” neodymium woofers, four 6.5” midrange speaker units, two 3” titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi-speaker combined to produce accurate directivity and maximum dynamic impact. Its midrange speaker units are beset in treble horn board and two waves guide plates are set in between to eliminate its interfere.Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely.
Model W-8

Type Line array system
Frequency Response 45Hz-20KHz±3dB

Directivity index(DI) 12(±2)1.2KHz-16KHz
Power handling LF 1200W(RMS)2400W(PEAK)
MF 600W(RMS)1200W(PEAK)
HF 200W(RMS)400W(PEAK)
Sensitivity LF 101dB(1W1M)
MF 104dB(1W1M)
HF 111dB(1W1M)
MaxS.P.L LF 132dB(PEAK/1M)
MF 132dB(PEAK/1M)
HF 134dB(PEAK/1M)
LF section 2×12" (310mm)neodymium woofer
75mm(3in) coil
Nominal impedance
8 ohm
MF section 4×6.5" (170mm)neodymium MF
50mm(2in)coil
Nominal impedance 16 ohm
HF section 2×3"neodymium compression driver
with 75mm titanium diaphragm
Nominal impedance 16 ohm
Output section 3-channel
Dispersion pattern 110°H×7.5°V
Finish Water-proof,wear-resistant textured black paint
Array design Arrays of less than 3×CV-8 will
provide poor dispersion control and
are neither recommended nor supported
Speaker cables LF 1(+)1(-) 2(+)2(-) MF 3(+)3(-) HF 4(+)4(-)
Rigging system Please refer to the CV-8 user
manual before any operation
Input connectors 2×Neutrik NL8
Recommend crossover LF 45Hz-400Hz
MF 400Hz-1200Hz
HF 1200Hz-20KHz
Dimensions 1100×405×595mm(W×H×D)
Package dimensions 1170×475×665mm/0.37cbm
Enclosure Birch Plywood
Net weight 65kg
Gross weight 69kg