4/8/16E1 to Eth coverter

Product ID: 4E1 to Eth coverter

Send Inquiry
CL-C2200,4200,8400,1600 Protocol converter is a high-performance, self-learning distant Ethernet Bridge with small size and low cost, which makes it suitable for cost-sensitive bridge connection as the LAN stretcher or separator based on the bite flow. It can study MAC destination address from the connected LAN constantly and determine whether forward or filter according to destination Mac address of data frames. Standalone and Rack mount module are both available.

1. Converts signals between (1~16) E1 interface and Ethernet interface and transmits video, voice, data and so on with Max. Bandwidth 7.968Mb
2. E1 channels (from channel 1 to channel 16) are used to transparently transmit data at 10M/100M.
3. Ethernet ports supports Vlan
4. Ethernet interface supports 5 kinds of setmode: 10MFDX, semiduplex, 100MFDX, 100M semi duplex and auto-negotiation.
5. When Ethernet data transmitted, frames are reordered in the E1 channel so as to assure frames’ order effectively and improve the transmission rate.
6. It allows that the max. Transmission difference of frames’ order between each two E1 channel can be 16 ms, which can assure it be used stably and reliably in each complicated network.
7. When transmitting Ethernet data, attenuation of bandwidth of eachE1 channel is only 64kbps and the actual effective bandwidth is 1.984Mbps.
8. Check the available channel from channel 1 to channel 16 automatically and distribute bandwidth automatically.
9. Two Ethernet interfaces can be exchanged.
10. When a receiving direction of any E1 link receives alarms about LOS, AIS and LOF, the corresponding sending direction will not be influenced. So asymmetry transmission is materialized over E1 link.
11. Supports SNMP.
  • E1 interface
    • E1 interface
  • Data rate: 2Mb
  • Code type: HDB3
  • Compliant with G.703, G.704, G.706 and G.823 75/120 BNC (75ohm)/RJ45 (120ohm)
  • 9000

Main Products

fiber modem,E1 Protocol converter,PDH Multiplexer,SDH,TDM over IP