Three Dimensional Panel Machine

Product ID: 4

Send Inquiry
construction panels, manufactured with a 3 dimensional wire structure in a combination of 2 cover mesh layers interconnected by truss wires, with expanded Polystyrene (EPS)-insulation core. It is a compact line, whose production process takes place in two main phases:
1.) Production of three-dimensional mesh panels from steel coils by means of a fully automatic mesh welder.
- Multiple welding machine with CNC-pitch feeding system to produce the flat mesh panels
- Multiple bending and welding machine to provide flat meshes with three dimensional rods
- Horizontal conveyor to transfer meshes toward assembling machine
2.) Assembling of structural panel by means of an automatic line. It consists of following main units:
- Assembling system to press three-dimensional frames into polystyrene core
- Multiple welder with CNC-pitch feeding system to weld together structural panels
- Automatic stacking device to eject and pile up finished panel outside the line
Electric current: 75kW
Max. intermittent welding power: 50 kVA
Welding current duty cycle: 5 %
Air compressor power: 3m 3/ min o.6Mpa
Width of panels: 1200 mm
Length of panels: min. 2500 mm, longer panels in steps of 00/40mm
Insulation core thickness: 100- 40 mm
Cover mesh: 50 x 50 mm openings
Wire diameter: -1.8- -3.8 mm as standard size proposed for
load bearing walls, slabs and roofs. Plain wire quality.
Also 2 longitudinal plaster runners as V-stamp of 20 mm.
Spacer wires: In truss configuration at 100 mm or 200 mm spacing.
Wire diameter 3.8 mm galvanized wire quality.
Insulation core: EPS, destiny approx. 15 -20 kg/m3
100 mm - 40 mm thickness.
Features
  • Three Dimensional Panel Machine
    • construction panels, manufactured with a 3 dimensional wire structure in a combination of 2 cover mesh layers interconnected by truss wires, with expanded Polystyrene (EPS)-insulation core. It is a compact line, whose production process takes place in two main phases:
  • 1.) Production of three-dimensional mesh panels from steel coils by means of a fully automatic mesh welder.
  • - Multiple welding machine with CNC-pitch feeding system to produce the flat mesh panels
  • - Multiple bending and welding machine to provide flat meshes with three dimensional rods
  • - Horizontal conveyor to transfer meshes toward assembling machine
  • 2.) Assembling of structural panel by means of an automatic line. It consists of following main units:
  • - Assembling system to press three-dimensional frames into polystyrene core
  • - Multiple welder with CNC-pitch feeding system to weld together structural panels
  • - Automatic stacking device to eject and pile up finished panel outside the line
  • Electric current: 75kW
  • Max. intermittent welding power: 50 kVA
  • Welding current duty cycle: 5 %
  • Air compressor power: 3m 3/ min o.6Mpa
  • Width of panels: 1200 mm
  • Length of panels: min. 2500 mm, longer panels in steps of 00/40mm
  • Insulation core thickness: 100- 40 mm
  • Cover mesh: 50 x 50 mm openings
  • Wire diameter: -1.8- -3.8 mm as standard size proposed for
  • load bearing walls, slabs and roofs. Plain wire quality.
  • Also 2 longitudinal plaster runners as V-stamp of 20 mm.
  • Spacer wires: In truss configuration at 100 mm or 200 mm spacing.
  • Wire diameter 3.8 mm galvanized wire quality.
  • Insulation core: EPS, destiny approx. 15 -20 kg/m3
  • 100 mm - 40 mm thickness.

Main Products

EPS foam block machine line