Bath Machine
Technical Requirements:
1. Plywood Size: 6000 × 2540 × (1-6) mm
2. Forming station Mast Lifting stroke: 1400mm
3. Heating method: multi-block area of small quartz heating plate heating, the percentage of energy to control the heating control each heating plate, computer-programmable controller. SCR power control electronics.
4. Cavity stainless steel, color steel shell. 150MM insulation layer (bulk density 90KG / m3).
5. Temperature rose to 200 º C the time required is less than 30 minutes.
6. Bake plate temperature difference: ± 20 º C.
7. Each cylinder can be independently set parameters, edit, save, and call at any time.
8. Splints force: rapid clip clamping force of each 150kg, can be equipped with pneumatic splint.
With 4 per meter rapid clip, and set up insurance to ensure they do not slide.
9. Splints sports car with slow start, the middle of fast run, slow stop in place to ensure fast and accurate positioning.
11. Lifts travel: 1000mm (adjustable). Molding Height 1200-1550 mm.
12. Lift the power of exposure: a low point of> 4T, the roof location> 10T
13. Lift during lifting height deviation: ± 3mm
MSN:xingyue121121@live.cn
www.gdzsyida.com
1. Plywood Size: 6000 × 2540 × (1-6) mm
2. Forming station Mast Lifting stroke: 1400mm
3. Heating method: multi-block area of small quartz heating plate heating, the percentage of energy to control the heating control each heating plate, computer-programmable controller. SCR power control electronics.
4. Cavity stainless steel, color steel shell. 150MM insulation layer (bulk density 90KG / m3).
5. Temperature rose to 200 º C the time required is less than 30 minutes.
6. Bake plate temperature difference: ± 20 º C.
7. Each cylinder can be independently set parameters, edit, save, and call at any time.
8. Splints force: rapid clip clamping force of each 150kg, can be equipped with pneumatic splint.
With 4 per meter rapid clip, and set up insurance to ensure they do not slide.
9. Splints sports car with slow start, the middle of fast run, slow stop in place to ensure fast and accurate positioning.
11. Lifts travel: 1000mm (adjustable). Molding Height 1200-1550 mm.
12. Lift the power of exposure: a low point of> 4T, the roof location> 10T
13. Lift during lifting height deviation: ± 3mm
MSN:xingyue121121@live.cn
www.gdzsyida.com
Main Products
Bath Machine，Blister machine