Description:
 Pneumatic Telescopic Masts are manufactured using heat treated high tensile aluminium alloy sections of different diameters telescoped into each other.
 The number of sections vary depending on the erected height , shut height and head load. The mast can be erected easily using low pressure air either by a foot pump or air compressor.
 As the sections extend vertically, they are locked using locking collars which are provided at the top of each section.
 Operating these collars is easy through Yoke keys. Once these collars are locked properly they allow the mast sections to remain in extended position. A full length key-way is provided in each of the section to prevent relative rotation between the sections. In order to withstand heavy wind loads, robust mast sections are also achored with guy ropes at different levels.
3.Telescope mast use three section, automatic lift. mast with staleness valve, avoid to drop suddenly. Mast can extend to 4.5 meters(height can be change).
4.Installed with generator, one tank gasoline can last 13 hours. If use city power, it’s long term.
5.Equipped with big tyres and brake system, increasing its capacity to climb and trail to move on uneven road. Big tyres also increase touchdown areas to oppose wind beating.
6.To satisfy customer requirement, we can produce this tower according to your requirement, such as lamp quantity, power, mast height, generator etc.