flat plate solar collector / flat plate solar panel(solar keymark, EN12975)
Product ID: flat plate collector
Send Inquiry
The Technical Parameters of Flat Panel Solar Collector
After wide research of the domestic and abroad solar market, combing the characteristics of Chinese and foreign products, Sunrain Group creates a new type of flat panel solar collector by itself. It adopts aluminum portfolio with 1 mm thickness for the frame, and copper-aluminum composite as the heat absorption core embedded in the aluminum frame, lying on 35 mm thickness glass fiber layer. The cover is made of 3.0 mm thickness toughened glass, and the sealing material is made of high quality EPDN. The special module installation system is easy to mount on both flat and sloped roof, realizing the perfect integration between buildings and collectors, also meeting the demand of heat absorption.
Technical Specification of Collector parts
Serial Number Name Material Specification Technics Performance Remark
1 Outer shell 6063/T5 / Entrusion/
Stamping Weathering/
Anti-corrosion Thickness:1.0
2 Collector pipe T2 Φ25X0.6
Heat entrusion Good thermal conductivity Purple copper pipe
3 tubule T2 Φ10X0.5
Heat entrusion Good thermal conductivity Purple copper pipe
4
Fin 6061 δ0.45
Heat entrusion Good thermal conductivity Anode oxidation treatment
5 Cover plate ERP δ3.0 Casting
Transmittance 86% Toughened glass
6 Airtight slat PDEN
Abnormity L=2000/1000
Injection Anti-ultraviolet radiation
Ebonite
7 Bottom thermal preserva-tion layer
Glass fibre cotton δ35 /
Low thermal conductivity Density: 12-50Kg/m3
8 Side
thermal preserva-tion layer
Mineral wool δ20 / Low thermal conductivity Density: 50-80Kg/m3
After wide research of the domestic and abroad solar market, combing the characteristics of Chinese and foreign products, Sunrain Group creates a new type of flat panel solar collector by itself. It adopts aluminum portfolio with 1 mm thickness for the frame, and copper-aluminum composite as the heat absorption core embedded in the aluminum frame, lying on 35 mm thickness glass fiber layer. The cover is made of 3.0 mm thickness toughened glass, and the sealing material is made of high quality EPDN. The special module installation system is easy to mount on both flat and sloped roof, realizing the perfect integration between buildings and collectors, also meeting the demand of heat absorption.
Technical Specification of Collector parts
Serial Number Name Material Specification Technics Performance Remark
1 Outer shell 6063/T5 / Entrusion/
Stamping Weathering/
Anti-corrosion Thickness:1.0
2 Collector pipe T2 Φ25X0.6
Heat entrusion Good thermal conductivity Purple copper pipe
3 tubule T2 Φ10X0.5
Heat entrusion Good thermal conductivity Purple copper pipe
4
Fin 6061 δ0.45
Heat entrusion Good thermal conductivity Anode oxidation treatment
5 Cover plate ERP δ3.0 Casting
Transmittance 86% Toughened glass
6 Airtight slat PDEN
Abnormity L=2000/1000
Injection Anti-ultraviolet radiation
Ebonite
7 Bottom thermal preserva-tion layer
Glass fibre cotton δ35 /
Low thermal conductivity Density: 12-50Kg/m3
8 Side
thermal preserva-tion layer
Mineral wool δ20 / Low thermal conductivity Density: 50-80Kg/m3
Certificate
- Solar keymark
Main Products
solar hot water heating,solar evacuated tube water heater,vacuum tube