Cruise Controls

Product ID: AP-250

Send Inquiry
For today's modern driver an aftermarket cruise control will provide several important benefits: 1. Elimination of accidental speeding: It is all too easy, with today's modern vehicles, to allow the speed to exceed the legal limit. By using a Lite-On Automotive cruise control, it will be possible to set the speed at a certain level. Once the speed has been set, the vehicle will maintain this speed, therefore avoiding accidental speeding. This is an important consideration with the increasing and more severe controls on speed limits set by the national authorities throughout the world. 2. Improved fuel economy: Every body is aware of the fact that the best fuel economy is achieved at a constant speed. Lite-On Automotive cruise control systems will adjust the throttle 5 times per second therefore providing minimal and very precise throttle action which guarantees a constant speed. Far more so than even the most fuel conscious driver could ever achieve. Significant improvements in fuel economy will be the result. 3. Reduced exhaust emissions: Because of today's growing environmental awareness, the general driver's mentality is changing. Minimal and smoother throttle action will not only improve the fuel economy but will also reduce exhaust emissions. Consequently less damage to the environment. The Lite-On Automotive cruise control will be a helpful accessory to achieve this. 4. Convenience: The driver can travel at a chosen "set" speed without the physical and mental effort of constantly monitoring the speed and applying the appropriate pressure on the accelerator. Let your fingers do the driving, traffic flow adjustments can be made simply by touching the command module.
No. # AP-50 AP-150 AP-250
Actuator / vacuum x x N/A
Actuator / electric N/A N/A x
Actuator / separate ECU x Metal housing Metal housing
Actuator / Dimensions actuator (L x W x H) 170 x 90 x 90 170 x 90 x 90 125 x 115 x 100
Speed sensing / ignition (-) coil N/A x x
Speed sensing / speed sensor engine ECU N/A x x
Speed sensing / W + Alternator N/A x x
Speed sensing / drive shaft sensing x x x
Speed sensing / speed pulse generator Opt. Opt. Opt.
Speed sensing / PPM range 2000, 5000 1.000 - 192.000 1.000 - 192.000
Safety features / brake safety switch x x x
Safety features / Clutch safety switch Opt. Opt. Opt.
Safety features / Over rev. protection (providing (-) ignition coil is connected) Opt. x x
Safety features / 25% over/under speed drop-out x x x
Safety features / false signal rejection x x x
Safety features / transient surpression x x x
Safety features / Lost motion actuator cable x x x
Specifications
  • Operating voltage: 10~18V
  • Temperature range: -40 degree ~ +125 degree
  • Current drain stand-by: 50mA
  • Current drain operating: 500mA
  • Transient capacity (5 MIN.): +24V
  • Reverse battery: -14V
  • Up-date rate: 0.2 seconds
  • Noise immunity: Hardware and software filtering
Features
  • A professional electric servo cruise control, especially designed for today's high performance vehicles, where there is little or no vacuum, available.
  • E1 Approval: * 72/245 * 95/54 * 1019 * 00 ABE No.: 90520
  • Note:
    • For several models a screw-in speed pulse generator is available. SPG is installed between speedometer and gear box.
    • A magnetic "reed" switch kit (AA-170) can be provided as a clutch switch, if required
    • If any of the circuits are not correctly installed, the cruise control will not operate

Main Products

car alarm system, cruise control system, automotive accessories