The Video Motion Detector uses solid state circuitry to sense movement in the video camera's field of view.
Specifications
- Input Voltage: AC 117V/220V, 50Hz/60Hz
- Video Input: 1.0 Vp-p/75 ohm, 1 Input
- Video Output: 1.0 Vp-p/75 ohm, 2 outputs (with detection window signals for indicating the motion detecting areas)
- Motion Detecting Window: 4 windows
- Window Position:
- Individually adjustable
- Horizontal position = within 80% of horizontal picture size
- Vertical position = within 80% if vertical picture size
- Sensitivity: adjustable
- Window Display: Selectable ( ON or MARK)
- Alarm Indication: alarm indicator LED, buzzer alarm
- Alarm Output:
- Relay contact (NO/NC), screw terminal-detachable.
- Contact Capacity: DC 24V, 1A, at resistance load
- Alarm out 1-4, alarm (ON), normal (OFF)
- Reset:
- Automatic, manual or remote reset.
- Automatic reset time = automatic reset time can be adjusted in a range of between 1-75seconds.
- Manual reset = push "reset" button
- Remote reset = by external remote control
- Power Consumption: 7 watt
- Video Connectors: BNC connector
- Position And Power Lamp: long life LED
- Operating Temperature: -5 Celsius to +60 Celsius
- Construction: steel, with black baked enamel finish.
- Dimensions: 218 W x 44 H x 200 D mm
- Weight: 1.57 kg (3.45 lb.)
Features
- The SSMD-614 VIDEO Motion Detector uses solid state circuitry to sense movement in the video camera's field of view. The unit defines an area sensitized to motion which may be positioned by the user and viewed on any part of the monitor screen. This sensitized area may be horizontal, vertical, or square, and as large as up to 80% of the area. The display switch allows the highlighted "window" to be displayed on the screen if desired. Detection sensitivity can also be adjusted. Audible and visual alarm signals are included as well.
- One set of normally open and normally closed relay contacts are brought out to a rear panel connector for switching the auxiliary equipment on and off. A connection is also provided so that the alarm indicators can be reset by any type of switch from a remote location.
- This unit is compact and light weight to fit easily on desk or table, or be single or dual-mounted in a standard 19 inch (48.3 cm) rack.
- CE (EMC / LVD) Approval.
Main Products
security systems video switcher, video signal equipment, video controls, monitors, video cameras, camera housing