steel cut wire shot
The steel cut wire shot is a metal shot available in four different sizes which are 1.0mm , 1.5mm , 2.0mm, 2.5mm , and it is manufactured according to SAE J441 and JB/T 8354-1996 standards. However ,this abrasive shot is made from recycled steel wire, so its length may be a little different from standard value.
Technical date:
Chemical composition: Carbon 0.45-0.70%
Manganese 0.30-1.30%
Silicon 0.15-0.35%
Sulfur ≤0.05%
Phosphorous ≤0.04%
Average hardness:
1.0mm:42-53HRC
1.5mm:41-45HRC
Max.hardness deviation :±1.0HRC（±40HV）
Tensile strength:
1.0mm:1750-2150MPa
1.5mm:1250-1450Mpa
Microstructure: Longitudinal:Uniformly deformed pearlite
Transverse: Uniformly deformed pearlite
Min.density(alcohol replace testing): 7.8g/cm³
Technical date:
Chemical composition: Carbon 0.45-0.70%
Manganese 0.30-1.30%
Silicon 0.15-0.35%
Sulfur ≤0.05%
Phosphorous ≤0.04%
Average hardness:
1.0mm:42-53HRC
1.5mm:41-45HRC
Max.hardness deviation :±1.0HRC（±40HV）
Tensile strength:
1.0mm:1750-2150MPa
1.5mm:1250-1450Mpa
Microstructure: Longitudinal:Uniformly deformed pearlite
Transverse: Uniformly deformed pearlite
Min.density(alcohol replace testing): 7.8g/cm³
Certificate
- SAE
- ISO
Main Products
metal abrasive ,shot blasting machine ,steel shot ,grit,aluminium shot