Plastic protective sleeve

Product ID: hose protector

Send Inquiry
Product Features:

Spiral Guard for Hydraulic Rubber Hose offers good insulation and abrasion protection for hoses, pipes and tubes.

Technical Requirement:

1. Exterior surface: Smoothly, No starving crack scuff and burr, No patency foaming and uneven, No inclusion.

2. Surface color: Black, Non-blushing, No obviously off-color.

3. Temperature resistance: The sample cannot be cracked and deformation when put it in heat-box at 90 C .

4. Tensile Strength: 25MPa at normal temperature, 30MPa at -40 celsius.

5. Impact Strength: 35KJ/sqm at normal temperature, 5KJ/sqm at -40 celsius.

6. Impact Strength: Not breakage.

7. Rockwell temperature(R): 75.

Inner diameter: 8-200mm

Types: Bright Flat Surface, Bright Cambered Surface; Matt Flat Surface, Matt Cambered Surface.

Color: Black, Gray, Red, Yellow, Blue, etc.

There are two kinds of packaging method:
1. For 2 m length, use 205x40x20 cm cartons, the spiral guard will be put in the carton on
  • ISO9001

Main Products

spiral hose guard ,hose guard