Horizontal chemical process pump
HZ (closed impeller type) chemical process pump is a single stage, single suction, cantilever type centrifugal pump which absorbs the advanced technologies from overseas, and is designed based on the advantages of F1, IH, CZ, ZBG chemical process pumps. HZ chemical process pump owns the features of better operation performance, anti-cavitation, long life of mechanical seals and bearings, reliable operation, updated structure and easy maintenance.
Parameters
Flow rate: Q= 2~2050 （m³/h）
Total head: H=3~150 (m)
Speed: n=1450/2900rpm
Temperature: T=-20~250℃
S.g.: γ≤1.85
Pump diameter: 50~350mm
ZGPV Chemical Process Pump Features
The impeller is a closed impeller, which uses rear blades and wear rings to balance axial forces.
The impeller and shaft are connected by a key and locked by a special impeller nut. Eliminates the possibility of impeller nuts becoming loose during operation, shutting down, and backflow.
HZ (closed impeller type) chemical process pump is a single stage, single suction, cantilever type centrifugal pump which absorbs the advanced technologies from overseas, and is designed based on the advantages of F1, IH, CZ, ZBG chemical process pumps. HZ chemical process pump owns the features of better operation performance, anti-cavitation, long life of mechanical seals and bearings, reliable operation, updated structure and easy maintenance.
Parameters
Flow rate: Q= 2~2050 （m³/h）
Total head: H=3~150 (m)
Speed: n=1450/2900rpm
Temperature: T=-20~250℃
S.g.: γ≤1.85
Pump diameter: 50~350mm
ZGPV Chemical Process Pump Features
The impeller is a closed impeller, which uses rear blades and wear rings to balance axial forces.
The impeller and shaft are connected by a key and locked by a special impeller nut. Eliminates the possibility of impeller nuts becoming loose during operation, shutting down, and backflow.
Main Products
Chemical pump, axial flow pump, forced circulation pump