WDM fiber media converter
WDM Fiber Media Converter Description
10/100M BiDi converter 20km SC connector TX 1310nm RX 1550nm over one fiber external power supply
10/100M BiDi converter 20km SC connector TX 1550nm RX 1310nm over one fiber external power supply
10/100M Single mode Single Fiber Media Converter can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). It could extend traditional 10/100M Fast Ethernet to the distance of 90km through single optical fiber link. It is with stable performance and good quality by adopting latest IC from USA and Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength.
WDM Fiber Media Converter Main Features
* The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type
* Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex
* The UTP port supports MDI/MDI-X auto crossover.
* Supporting 1600 bytes packet for management
* Internal circuit of prevented thunder could greatly reduce damage of onverters caused by thunderbolt induction
* Indicator function of link fault (LFP): When optical fiber is at fault, the converter could stop all the link
* Converter working mode could be chosen: Store and forward switch mode,modified cut-through switch mode, or Converter mode
Fiber Media Converter Technical Parameters
* Operating standards: IEEE802. 3u, 10/100Base-TX and 100Base-FX
* MAC addresses table: 1K
* Data buffer: 128K
* Connectors: UTP Connector: RJ-45, 10/100Mbps;
Fiber Connector: SC, 100Mbps
* Cable:
UTP: Cat. 5 UTP cable (the max distance up to100m)
Fiber ( Singlemode): 8. 3/125, 8. 7/125, 9/125, 10/125μ M(the max distance up to 90km)
* Flow Control
Full Duplex: IEEE802. 3x
Half Duplex: Back pressure
10/100M BiDi converter 20km SC connector TX 1310nm RX 1550nm over one fiber external power supply
10/100M BiDi converter 20km SC connector TX 1550nm RX 1310nm over one fiber external power supply
10/100M Single mode Single Fiber Media Converter can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). It could extend traditional 10/100M Fast Ethernet to the distance of 90km through single optical fiber link. It is with stable performance and good quality by adopting latest IC from USA and Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength.
WDM Fiber Media Converter Main Features
* The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type
* Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex
* The UTP port supports MDI/MDI-X auto crossover.
* Supporting 1600 bytes packet for management
* Internal circuit of prevented thunder could greatly reduce damage of onverters caused by thunderbolt induction
* Indicator function of link fault (LFP): When optical fiber is at fault, the converter could stop all the link
* Converter working mode could be chosen: Store and forward switch mode,modified cut-through switch mode, or Converter mode
Fiber Media Converter Technical Parameters
* Operating standards: IEEE802. 3u, 10/100Base-TX and 100Base-FX
* MAC addresses table: 1K
* Data buffer: 128K
* Connectors: UTP Connector: RJ-45, 10/100Mbps;
Fiber Connector: SC, 100Mbps
* Cable:
UTP: Cat. 5 UTP cable (the max distance up to100m)
Fiber ( Singlemode): 8. 3/125, 8. 7/125, 9/125, 10/125μ M(the max distance up to 90km)
* Flow Control
Full Duplex: IEEE802. 3x
Half Duplex: Back pressure
Certificate
- ISO9001:2000
Main Products
fiber optic transmission,fiber optic media converter,fiber optic modem