high quality alloy hot work tool steel
good hardenabiltiy,good toughness,fine crystalization
EAF+LF+VD/SKF+ESR
ISO+UT passed
We produce high quallity at very competitive prices.
4Cr5MoSiV is a kind of high quality alloyed hot work die steel. It possess high thermal strength and hardness.small deformation for heat-treated.
1.Similar standard: DIN 1.2343, AISI H11.
2.Smelt Technique:EAF+LF+VD(SKF)+ESR.
3.Heat treatment:
Anneal:860-800°C, hardness < ,=229HB
Quench temperature:1000-1030 °C,oil or air cooling
Temper temperature:530-580 °C,tempering two times, hardness:47-49HRC
Hardness:53-55HRC
4.Face treatment: black,peeled,turned,milled.
5. Rounds dia. not less than 20mm;block 15-500mm*50-1200mm
6. Chemical Analysis: %
C 0.38
Si 1.00
Mn 0.40
Cr 5.10
Mo 14.60
V 0.50
P max0.003
S max0.005
good hardenabiltiy,good toughness,fine crystalization
EAF+LF+VD/SKF+ESR
ISO+UT passed
We produce high quallity at very competitive prices.
4Cr5MoSiV is a kind of high quality alloyed hot work die steel. It possess high thermal strength and hardness.small deformation for heat-treated.
1.Similar standard: DIN 1.2343, AISI H11.
2.Smelt Technique:EAF+LF+VD(SKF)+ESR.
3.Heat treatment:
Anneal:860-800°C, hardness < ,=229HB
Quench temperature:1000-1030 °C,oil or air cooling
Temper temperature:530-580 °C,tempering two times, hardness:47-49HRC
Hardness:53-55HRC
4.Face treatment: black,peeled,turned,milled.
5. Rounds dia. not less than 20mm;block 15-500mm*50-1200mm
6. Chemical Analysis: %
C 0.38
Si 1.00
Mn 0.40
Cr 5.10
Mo 14.60
V 0.50
P max0.003
S max0.005
Certificate
- ISO and UT
Main Products
hot work tool steel、cold work tool steel、plastic mould steel ect.