1.PH WATER can certainly dissolve sulfation to the limit.
　(Because of industrial uses, it can be last for long time.)
2. Add into PH WATER while battery is new, and that can extend the life of the battery to 2 times.
　(It slashes costs.)
3. PH WATER can remove sulfation and remain in the battery even if plates generate new sulfation during every charge.
　(Plates always keep the best electric conductivity toward using 10 years even more.)
4. The effects of PH WATER can maintain 1~1.5 years.
　(Adding suitable PH WATER into each plate per 1.5 years)
5. Different specific gravity of each plate with a battery which need to be replace can back to 1.26 ~1.28 in the new state.
　(Keep normal value so that it can be deeper and stable charge-discharge)
6. The CCA values would be increased substantially.
7. While sulfation crystallization are dissolved, it forms film to protect plates from breakage and separating.
　(To avoid leads separation from shaking and over-charge)
8.PH WATER can be restored as long as battery belongs non-physical damages.
9.Adding PH WATER into a battery of cars in use and continuously working in the 1200 rotation above 2 hours, after three weeks, it can show results.
　(PH WATER has immediate and continuting effects.)
10.PH WATER isn’t strong-acid. You don’t hurt by directly touching with your fingers.
　(Abandoning PH WATER into oceans or lakes can be natural decomposition by microorganism. And it doesn’t cause any toxic gases or harmful substances during ignited.)
11.Considering environmental protection, we made small pack to conveniently carry and a little PH WATER just shows the results.
　(No irritant and you can place PH WATER into the car for emergency. It also has safety labeling in overseas.)
12.After adding PH WATER, the discharge time of battery is significantly extended, so that cars which do not need high-power load can easily start the power, therefore, it will a little fuel your vehicle consumes.