Application

The pump is mainly used to deal with the convey of gas-bearing materials. So it is
widely used in the occassions that the liquid level is instable,and the liquid level is lower than that
of inlet to draw the material ,and also used as reture in the CIP system .And it is the necessary
convey equipment in the food,chemical ,pharmacy .field.

Functions and specifications

The design adopt the side channel principle leading to the excellent suction,sanitariality ,low
power ,lower noise ,easy to clean ,and low cost to maintanance .
shaft sealing
YUY sanitary priming pump seal is mechanical seal ,include the stationary ring SUS316L steel
embedded in grapgite structure ,and the movable ring made of silicon carbide .

Material

All the part contact with medium ,pump case.pump cover and impeller are made of AISI316L stainless
steel .
The part contact with medium：AISI316L stainless steel
Other parts：AISI304 stainless steel
The sealing contact with medium：EPDM
UnRegisteredSurface treatment
The part contact with medium is polished ,and other part is glass painted or sand
blasted treatment.
Datasheet
Max Inlet Pressure：0.5Mpa
Temperature Range：-10°C to +140°C(EPDM)
flushed mechanical seal：
water pressure：Max0.1MPa
water consumption：0.25-0.5L/min

Motor

I)According to the configuration ,we adapt three phase“ABB”brand AC motor. The motor desiged
according to the International Eltronical Commission IEC 60034.IEC60072,and comply with the
EC requirements of “CE”marking requirement .

II).The explosion-proof motor also available ,that can meet with the requirement of different
applications .
III)It with excellent electric performance ,and with low niose,low vibration,the protection grade is
IP55,insulation grade is F.
Iv) The operate involtage
≤3Kw，220-240V/380-420V，△/Y
＞3Kw，380-420V/660-690V, △/Y
v)Frequency
50Hz/60Hz

VI)Operate way :continously

VII)Running Speed : 2900r/min