fiberglass chopped strand mat
fiberglass chopped strand mat is an non-woven E or C-glass fiberglass fabric manufactured by spreading continuous filament roving of 50 mm in length randomly and uniformly in combination with polyester binder in power form (or other binder in emulsion form).
Specification:
glass type: E-glass and C-glass chopped strand mat
bond type: powder or emusion
density: 80 g/m^2-900g/m^2
normal types: 180g/m^2, 225g/m^2,300g/m^2,450g/m^2, 600g/m^2
bond content: 100g/m^2(10%-15%),300g/m^2,450g/m^2,600g/m^2(4%-6%)
roll width:200mm-2600mm
normal types:750mm, 1040mm, 1250mm, 1270mm, 1450mm
roll weight: 28kgs-55kgs
normal types: 28kgs, 30kgs, 35kgs.
Application: hand lay-up FRP moldings, such as, various sheets and panels, boat hulls, boat tubs, cooling towers, corrosion resistant, vehicles.
Deposited: It should be stored in dry, cool, clean and rainproof area. Recommended temperature range of storage is between 15-30 and relative humidity between 40%-70%.
Specification:
glass type: E-glass and C-glass chopped strand mat
bond type: powder or emusion
density: 80 g/m^2-900g/m^2
normal types: 180g/m^2, 225g/m^2,300g/m^2,450g/m^2, 600g/m^2
bond content: 100g/m^2(10%-15%),300g/m^2,450g/m^2,600g/m^2(4%-6%)
roll width:200mm-2600mm
normal types:750mm, 1040mm, 1250mm, 1270mm, 1450mm
roll weight: 28kgs-55kgs
normal types: 28kgs, 30kgs, 35kgs.
Application: hand lay-up FRP moldings, such as, various sheets and panels, boat hulls, boat tubs, cooling towers, corrosion resistant, vehicles.
Deposited: It should be stored in dry, cool, clean and rainproof area. Recommended temperature range of storage is between 15-30 and relative humidity between 40%-70%.
Main Products
fiberglass mesh/mat/cloth/insulating sleeve