bending machine Hydraulic Press Brake Press Brake

Product ID: WC67Y WC67K

Send Inquiry
Performance

Steel-welded Construstion,vibration to eliminate stress,with high strength and good rigidity. Hydraulic top drive,steadiness and reliability.

Mechanical stop ,steel torsion bar to maintain synchronization, high precision.

Motorized-adjusting device of backgauge and rams stroke,fine adjusting by hand wheel ,numerical display.

Deflection compensation unit installed on the top die Manual crowned bottom die holder is adopted for the machine above 250ton slength 4000mm.

Travel limit protection.Full machine guarding with safety interlocker.
Specifications
  • Series WC67Y Hydraulic Press Brake
    • Features:
  • Principal machine selects WC67Y series press brakes;
  • Fitted with special NCsystem for bender of DELEM company;Travels of rear block stop and slide block are all controlled by computer automatically;
  • Rear block stop adoopts ordinary screw mandrel and presicion screw mandrel is momdrel unilateral location to eliminate the transmission clearance.
  • Series WC67Y Hydraulic Press Brake
    • Performance:
  • Steel-welded construction, vibration to eliminate stress,with high strenght and good rigidity.Hydraulic top-drive ,steadiness and reliability.
  • Mechanical stop ,steel torsion bar to maintain synchronization,higt precision.
  • Synchornization,high precision.
  • Motorized-adjusting device of backgauge and rams stroke, fine adjusting by handwheel,numerical display.
  • Deflection compensation unit installed on the top die .Manual crowned bottom die holder is adopted ofr the machine above 250ton slenght4000mm.
  • Travel limit protection.Full machine guarding whth safety interlocker.
  • WC67K NC HYDRAULIC PRESS BRAKE
    • Optional
  • Pedestal mounted palm button station including emergency stop and up button.
  • Automatic crowned compensation mechanism.
  • Pneumatic sheet support.
  • Photoelectricity protection (Infra-red light senor to pallet load area).
  • ===== Performance =====
  • Mechanical stop,steel torsion bar to maintain synchronization,high precision.
  • Equipped with special controller with automatic test and self-diagnosis.
  • Programming a product simply consists of introducing the characteristics of the material to be bent,the dimensions of the product and the neessary tooling & die.The optimizing software serches for the best bending cycle.
  • Ram stroke (Y) and backgauge (X,R,Z) are controlled by controller automatically,high productivity.
  • Backgauge adopts ball-bearing screw and rolling guideway,quick speed and high repert positioning precision.
  • Imports including linear transducer,pressure proportional valve and servo motor.
  • The models are available in variety of tounge from 40 ton up 300 ton and length from 2000 mm up to 4000 mm.The specifications refer to Series WC67Y.Any tailor-made are available on request.
  • Series WC67K 2-SETS of Tandem
    • Performance:
  • Use Two ou more than two WC67K series machines;
  • Providing duplek linked or multiplex synchronous device;
  • The linked braked can product unususlly long workpieces especially suitable for city building , expressway lamp poles, automobile beams and so on;
  • The linked brake can be used alone ,in order to raise production efficiency;
  • We can design and produce for special order;
Features
  • Series WC67Y Hydraulic Press Brake
    • Performance
  • Steel-welded Construstion,vibration to eliminate stress,with high strength and good rigidity. Hydraulic top drive,steadiness and reliability.
  • Mechanical stop ,steel torsion bar to maintain synchronization, high precision.
  • Motorized-adjusting device of backgauge and rams stroke,fine adjusting by hand wheel ,numerical display.
  • Deflection compensation unit installed on the top die Manual crowned bottom die holder is adopted for the machine above 250ton slength 4000mm.
  • Travel limit protection.Full machine guarding with safety interlocker.

Main Products

shearing machine Press Brake rolling mahcine