Steel Abrasives are used to clean a wide variety of surfaces and parts, for example
De-sanding and cleaning Foundry castings
Descaling metal sheet, billets and profiles produced by the steel industry
Surface preparation prior to coating
Steel Abrasives are used in the following industries and applications:
Foundries, Metal Producers, Shot Peening, Surface Preparation, General Cleaning, Granite Cutting, Ballast
De-sanding and cleaning Foundry castings
Descaling metal sheet, billets and profiles produced by the steel industry
Surface preparation prior to coating
Steel Abrasives are used in the following industries and applications:
Foundries, Metal Producers, Shot Peening, Surface Preparation, General Cleaning, Granite Cutting, Ballast
Specifications
- Steel shot: S70 S110 S130 S170 S230
- Steel Shot is a spherical (round) shaped product made of steel that has been heat treated to a finely tempered martensitic structure, providing maximum breakdown resilience which results in extending product life.
- Available in the following sizes, according to SAE screen analysis:
- G10, G12, G14, G16, G18, G25, G40,
- Steel Grit is an angular product made from heat treated shot that is processed through high efficiency crushers and graded to size.
- Available in the following sizes:
- cw1.0mm cw1.5mm
- Steel cut wire is used for blast cleaning of shot blasting machine, steel pre-treatment, steel structure.
Features
- Cast steel shot
- Chemical Composition of the products:
- C 0.70-1.20% Mn 0.60-1.20%, Si 0.40-1.20%.
- Hardness:
- Steel shot: 40-60HRC
- Density:
- Steel shot: 7.4g/cucm
- Microstructure: Tempered Marten site
- High strength, long lasting Ervin life: Cast steel shot and grit: 2000 cycles;
- Steel cut wire shot: 2800 cycles
- Cast steel grit
- Chemical Composition of the products:
- C 0.70-1.20% Mn 0.60-1.20%, Si 0.40-1.20%.
- Hardness:
- Steel grit: 42-66HRC
- Density:
- Steel grit: 7.6g/cucm
- Steel cut wire shot
- Chemical Composition of the products:
- C 0.70-1.20% Mn 0.60-1.20%, Si 0.40-1.20%.
- Hardness:
- Steel cut wire shot:1.0mm:51-53HRC ; 1.5mm:41-45HRC
- Density:
- Steel cut wire shot:7.8g/cucm
Main Products
steel shot, steel grit, steel cut wire shot