thermocouple,immerse sampler

Product ID: 01

Send Inquiry
Direct Insertion type sampler

1.General introduction

  During the process of smelting, in order to master the changing of the liquid steel composition, sampling must be taken to get process analysis. During the pouring process, end production samples often are taken to get end production analysis. The progress of science and technology is pushing the progress of detection techniques. So studying fast process analysis methods and shortening sample taking time are the channels to raise analysis techniques and reinforce quality control.

2.Application range:

The sampler is suitable for every steel factory to sample in tundish, ladle and horizontal casting.It has


  When the sample instrument is put into the liquid steel, according to the floating continuous equation and static pressure effect of molten steel, the liquid steel will flow into the sample room by itself through the instrument taking the sample. The liquid steel in the sample room can be analyzed quickly and get C, Mn, P, S etc.

Main technical parameter

(1)test success rate 90%.

(2)steel sample is full ,quality is thick ,smooth and no atmospheric holes.

(3)the time of taking a sample is 4 to 6 seconds in applied sphere.
    • Graphite electrodes:
  • 1. Regular power: dia150mm-500mm.
  • 2. High power: dia200mm-500mm.
  • 3. Ultra high power: dia300-500mm.
  • grade:RP,HP,UHP

Main Products

graphite electrode,copper mould tube,petroleum coke,cored wire,brick