Touch Screen LCD Module

Product ID: TM

Send Inquiry
Touch Screen LCD Module uses 128x64 dot pixel Chip On Glass (COG) Super Twisted Nematic (STN) transmissive monochrome Optrex F-51553 or F-51852 LCDs, TC51553 or TC553/852 Controller, and Four-Wire Analog Resistive Touch Screen. It can integrate with other applications, ease user interface, and make significant changes in graphic LCD system design. The touch screen is placed over the LCD so that the responsive area of the panel covers the viewable area of the display. The touch screen interface is being used in a wide variety of applications to improve human-computer interaction. It is pressure sensitive so it responds to any input device, including finger, gloved hand, or pen stylus. This module offers easy-to-use serial data interface, allows to control from raw row and column pixel data conversion to complete embedded graphic control subsystems with memory. Additionally, if reprogramming Atmega16 microcontroller, this module can be used as stand alone unit allowing greater design creativity.
Specifications
  • Optrex F-51553 128x64 LCD
    • Optrex F-51553 series modules are 128 x 64 dot pixel chip on glass (COG) STN transmissive monochrome LCD with a 2.8-inch diagonal viewing area for character and/or graphics display.
  • Optrex F-51852 128x64 LCD
    • Optrex F-51852 series modules are 128 x 64 dot pixel resolution monochrome graphic LCDs with a 2.8-inch diagonal viewing area for characters and/or graphics display in white, blue, green or yellow.
  • TC51553 Controller PCB
    • The TC51553 is an Evaluation/Demo board for Optrex F-51553 128x64 COG Monochrome STN LCD. It allows the user to individually control each display pixel. This independent pixel control allows the user to display both text and pictures simultaneously. It uses an ATMEGA16 microcontroller and external AT24C64/AT24C512 serial EEPROM. The microcontroller can be reprogrammed at any time by using AVRISP device. This board requires a single 5 VDC supply to be plugged into J5 connector (bypass voltage regulator) or 6-15 VDC power supply to be plugged into J11 connector.
  • TC553/852 Controller PCB
    • The TC553/852 is an Evaluation/Demo board. It supports both Optrex F-51553 as well as its enhanced version F-51852 128x64 COG Monochrome STN LCD. This controller allows the user to individually control each display pixel. This independent pixel control allows the user to display both text and pictures simultaneously. The TC553/852 uses an ATMEGA16 microcontroller and external AT24C512 serial EEPROM. The microcontroller can be reprogrammed at any time by using AVRISP device. This board requires a single 5 VDC supply to be plugged into J5 connector (bypass voltage regulator) or 7-15 VDC power supply to be plugged into J11 connector.
  • 4Wire Analog Resistive Touch Screen
    • The touch screen is placed over the LCD so that the responsive area of the panel covers the viewable area of the display. The touch screen interface is being used in a wide variety of applications to improve human-computer interaction. It is pressure sensitive so it responds to any input device, including finger, gloved hand, or pen stylus.
Features
  • Downloadable bitmap templates
    • Downloadable Touch Screen LCD Module bitmap Templates are available from our web site.