BOPP plain printing & lamination is widely used in printing and laminating for packaging application. TFI film offers exceptional clarity. Good dimensional stability, flatness and strength.
Typical properties | Unit | Test methods | Typical value | Typical value | Typical value | Typical value |
---|---|---|---|---|---|---|
Thickness | Micron | Micrometer | 20 | 25 | 28 | 30 |
Yield | m^2/kg (min.) | N/A | 55 | 44 | 39 | 37 |
Density | g/cm^3 | ASTM D-1505 | 0.91 | 0.91 | 0.91 | 0.91 |
Average thickness variation | % (max.) | ASTM E-252-78 | +/-3 | +/-3 | +/-3 | +/-3 |
Tensile strength | kg/mm^2 (min.) MD/TD | ASTM D-882-83 | 13/24 | 13/24 | 13/24 | 13/24 |
Elongation at break | % (max.) MD/TD | ASTM D-882-83 | 170/70 | 170/70 | 170/70 | 170/70 |
Thermal shrinkage (120 Celsius 15 minutes) | % MD/TD | ASTM D-1204-84 | < 4.0/< 2.0 | < 4.0/< 2.0 | < 4.0/< 2.0 | < 4.0/< 2.0 |
C.O.F. | Film/film | ASTM D-1894 | 0.35-0.50 | 0.35-0.50 | 0.35-0.50 | 0.35-0.50 |
Half decay time | Seconds (max.) | Static honest meter | 600 | 600 | 600 | 600 |
Haze | % (max.) | ASTM D-1003-61 | 1.5 | 1.8 | 2.0 | 2.0 |
Gloss (angle 45 degree) | % (min.) | ASTM D-2457-70 | 85 | 85 | 85 | 85 |
WVTR | g/m^2/24 hr (max.) | ASTM E-96 | 8 | 6 | 5 | 4 |
O(2)TR | cc/m^2/24 hr (max.) | ASTM D-1434 | 2000 | 1800 | 1700 | 1600 |
Corona treatment for one side | Dyne/cm (min.) | ASTM D-2578 | 38 | 38 | 38 | 38 |
Specifications
- Paper core I.D.: 76mm (3 in.) 152mm (6 in.)
- Roll O.D.: max. 600mm
- Width range: 100mm-1500mm (other width on request)
- Length range: standard 4000m., 6000m.
Features
- Product code: No. OP-110R1
- Further technical information on request
Main Products
plastic films