R & D/PC Master Tool Kit

Product ID: TC-1111, TC-1112

Send Inquiry
The soldering iron that put into the tool kit whose wire is UL approved.
Specifications
  • TC-1111: R and D Tool Kit
    • Spare parts tube.
    • IC extractor.
    • IC inserter 24-28 pin ICS.
    • 3/16" nut driver.
    • 1/4" nut driver.
    • #0 Phillips screwdriver.
    • #1 Phillips screwdriver.
    • #2 Phillips screwdriver.
    • 1/8" flat screwdriver.
    • 3/16" flat screwdriver.
    • 1/4" flat screwdriver.
    • T10/T15 star driver.
    • 5" long nose plier.
    • Tweezer.
    • Reverse action tweezer - mini.
    • 3 claw part retriever.
    • Scraper/Wire brush.
    • Curved scribe/Scraper.
    • Scribe/Fork.
    • Heat sink.
    • Solder sucker.
    • Solder reel.
    • Soldering iron.
    • 6" adjustable wrench.
    • 8" wire stripper, crimpier.
    • Vinyl zipper case.
  • TC-1112: PC Master Tool Kit
    • Spare parts tube.
    • IC extractor.
    • IC inserter 24-28 pin ICS.
    • 3/16" (or 5mm) nut driver.
    • 1/4" (or 6mm) nut driver.
    • #0 Phillips screwdriver.
    • #1 Phillips screwdriver.
    • #2 Phillips screwdriver.
    • 1/8" flat screwdriver.
    • 3/16" flat screwdriver.
    • 1/4" flat screwdriver.
    • T10/T15 star driver.
    • 5" long nose plier.
    • Tweezer.
    • Reverse action tweezer - mini.
    • 3 claw part retriever.
    • Solder reel.
    • Soldering iron.
    • 6" adjustable wrench.
    • 8" wire stripper, crimpier.
    • Vinyl zipper case.

Main Products

Computer & Electronic tool kit, Hand Tool, Tool Kit Hardware, Manicure Set, Gift, Multi-Purpose Knife, Multi-Purpose Pliers